home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 25
/
Cream of the Crop 25.iso
/
comm
/
dxh52eng.zip
/
DXH52E1.ZIP
/
CFGFILES.EXE
/
COMMANDS.INI
< prev
next >
Wrap
Text File
|
1997-01-05
|
4KB
|
94 lines
'File contains commands issued by DXHUNT and other...(such as port AD.& IRQ)
'Don't insert or delete lines, even if empty
'IF YOU ACCIDENTALLY DAMAGE THIS FILE AND YOU'RE NOT ABLE TO CORRECT IT,
'THE BEST THING TO DO IS TO DELETE IT AND REINSTALL. INSTALLATION WILL
'RECREATE THE FILE WITH DEFAULT VALUES, WITHOUT CHANGING ANYTHING ELSE
'See file CONFIG.TXT, for further details.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'1:Command mode TNC's prompt; DEFAULT=cmd:
cmd:
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'2:Command to test current stream status; DEFAULT=C
'other solutions: |AC (or |1C if streams are numbered)
C
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'3:Command to test all stream status; DEFAULT=CS ; KANTRONICS=S
'other possible solutions are C or |AC (or |1C if streams are numbered)
CS
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'4:Command to immediately disconnect current stream; DEFAULT=D
'you can set multiple commands with # ex. |AD#|BD
'or set 1 second pause with "+" ex. |AD#+|BD
'if you need the character(Ctrl-C), take it from here>
'point it, then shift-right arrow to select it
'Ctrl-Ins to copy it, Shift-Ins to paste it where needed
D
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'5:Generic spot header (case sensitive) DEFAULT=DX de
DX de
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'6:Path and name of command set file; ex.:C:\TPK\PK232.SET;DEFAULT empty
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'7:Timeout on modem's string completion (seconds) ;default=0.1 min=0.1 max=3
0.1
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'8:Delay between subsequent connection commands; default=1s min=1s max=600s
1
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'Serial ports settings, enter address in hexadecimal format (header &h) or
'in decimal format (just the number) followed by IRQ line
'Change only in case of non standard communication ports.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'9:COM1 port
&h3F8
4
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'10:COM2 port
&h2F8
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'11:COM3 port
&h3E8
4
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'12:COM4 port
&h2E8
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'13:COM5 port
&h4220
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'14:COM6 port
&h4228
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'15:COM7 port
&h5220
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'16:COM8 port
&h5228
3
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'17:Use FIFO serial buffer (possible with 16550A UART) YES/NO DEFAULT=NO
'YES:better in case of 16550A UART (NO in any case under WINDOWS 2.x o 3.0)
NO
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'18:FIFO serial buffer character threshold (1,4,8,14) DEFAULT=8
'In case of 16550A UART and previous line=YES:com interrupt every n characters
8
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'19:Automatic talk reply (active when SET/NOHERE:Alt-Z) YES/NO DEFAULT=YES
YES
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'20:Talk reply message (active when SET/NOHERE:Alt-Z)
-> Zzzzzz...Automatic answer by DXHUNTER: I'm not here now... 73.
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'21:Antitimeout periodic command DEFAULT=SPACE
'you can also set multiple commands with "#" ex. |B #|C #|A
'or set 1 second pause with "+" ex. |B #+|C #+|A
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''